Inspection

Food Safety Retail Inspection

Inspection details


Inspection Date Inspection Type In Person/Virtual Establishment Type Risk Type Permit posted Previous inspection available
01/13/2025 High Risk Food Retail No No

Equipment Temperatures


Description Temperature
Walk In Cooler 38
Under Counter Prep Cooler 38
Front Line Sandwich Prep Coolers 36

Food Temperatures


Description Temperature State Of Food
Meatballs 170
Sliced Ham 39
Sliced Turkey 38
Tuna Salad 35
Sliced Cheese 39
Shredded Cheese 38
Sliced Roast Beef 38

Warewashing Information


Machine Name ppm Sanitizer Name Sanitizer Type Temperature
Three Compartment Sink Not Set Up Super San

Violations


Violation Status Observations Corrective Actions Violation Category Repeat
08 Adequate handwashing sinks properly supplied and accessible in 0
08 0080-04-09-.05(2)(e)1 Handwash sink shall only be used for washing hands; accessible at all times out Observed employee rinse the meatball serving spoon in the front hand wash sink at the time of inspection. Priority Foundation (PF) 0
14 Food contact surfaces; clean and sanitized in 0
14 0080-04-09-.04(6)(a) Food contact surfaces shall be visually clean. out Observed residual food soils on the slicer push plate at the time of inspection. Priority Foundation (PF) 2
19,20 safe temperature holding in 0
19,20 20 Cold holding temperature in 0
19,20 0080-04-09-.03(5)(a)6(i)(II) Cold holding at 41F or less for Time/temperature control for safety foods out Observed a metal bowl of shredded RTE chicken and portioned small black containers of RTE shredded chicken on the food prep table with internal temperatures between 56 and 60 degrees. Food item temperatures were checked internally with TDA verified thermometer. PIC discarded food items at the time of inspection. Priority (P) 2
32 Approved thawing methods in 0
32 0080-04-09-.03(5)(a)3 Thawing shall be performed in a refrigerator (under 41F) or submerged in cold running water. out Observed 3 bags of commercially packaged protein food items in the three-compartment sink that were in the thawing process but were not submerged in cold running water. Core (C) 0
33 Thermometers provided and accurate in 0
33 0080-04-09-.04(2)(d)9 Temperature Measuring Devices shall be located in hot and cold holding units; easily readable out Inspector could not find temperature measuring devices in the front sandwich prep coolers at the time of inspection. Priority Foundation (PF) 0
40,41 Utensils in 0
40,41 40 In use utensils properly stored in 0
40,41 0080-04-09-.03(3)(d)2 In use utensils for food preparation or dispensing shall be stored properly; handle above food, or in running water, and protected. out Observed a meatball serving spoon at the front sandwich prep station used for hot held meatballs stored on a piece of sandwich paper on top of the meatball container lid unprotected at the time of inspection. Meatball spoon had been previously used at the time of inspection. Core (C) 0
40,41 41 Utensils, equipment, and linens; stored, dried, and handled in 0
40,41 0080-04-09-.04(9)(a)1 Equipment and utensils are allowed to air-dry or used after adequate draining out Observed several metal pans stored as clean on a rack above the three compartment sink that were not allowed to dry completely before storing. Also known as "Wet Stacking". Core (C) 0
44,45 Utensils and equipment in 0
44,45 44 Food and Non-food contact surfaces, cleanable, designed, constructed, and used in 0
44,45 0080-04-09-.04(1)(a) Food contact equipment surfaces shall be safe, durable, corrosion-resistant, nonabsorbent, smooth, and easily cleanable out Observed deep cuts on the cutting boards located at the front sandwich prep area at the time of inspection. Priority (P) 0
44,45 45 Warewashing facilities installed, maintained, and used; test strips in 0
44,45 0080-04-09-.04(3)(b)4 Test Kits to measure concentration of sanitizing solutions. out Noted that the 2 rolls of sanitizer test strips expired in 2024. Priority Foundation (PF) 1
Total Score Violation Score Inspection Score Inspection %
100 19 81 81
Violation Category Total Count Violation Count Inspection Count Inspection %
69 0 69 100
Core (C) 45 3 42 93
Priority (P) 49 2 47 95
Priority Foundation (PF) 39 4 35 89