| 19,20 safe temperature holding |
in |
|
|
|
0 |
| 19,20 20 Cold holding temperature |
in |
|
|
|
0 |
| 19,20 0080-04-09-.03(5)(a)6(i)(II) Cold holding at 41F or less for Time/temperature control for safety foods |
out |
4 Italian Salads, 8 Chicken Salad sandwiches, 15 asst. Sub sandwiches, 14 Cheese sticks, 15 Salami/Cheese snacks, 5 wraps, 30 Beef/Cheddar snacks, and 11 "keep refrigerated" Pickles stored in the reach in retail open air case were observed to be between 47* and 58*F; out of the safe cold holding temperature range of 41*F and below. Product was checked with a TDA probe thermometer. |
Management voluntarily discarded referenced product during inspection. |
Priority (P) |
2 |
| 21,22 Date & Time for food safety |
in |
|
|
|
0 |
| 21,22 21 Date Marking and Disposition |
in |
|
|
|
0 |
| 21,22 0080-04-09-.03(5)(a)7 Date Marking; 6 days beyond the day of creation; exceptions are commercially made deli salads, hard cheeses, semi-soft cheeses, cultured dairy products, preserved fish, ... |
out |
Cold brew Mocha Iced Coffee was observed to be dated for 14 days with a preparation date of 6/10/25 and a discard date of 6/23/25; beyond the 7-day date marking period. Date Marking Requirements; 6 days beyond the day of creation; exceptions are commercially made deli salads, hard cheeses, semi-soft cheeses, cultured dairy products, preserved fish, dry fermented sausages, or salt-cured products.
|
|
Priority (P) |
0 |
| 30,31 Food temp controls |
in |
|
|
|
0 |
| 30,31 30 Proper cooling methods, adequate equipment for temperature control |
in |
|
|
|
0 |
| 30,31 0080-04-09-.04(3)(a)1 Equipment for cooling, heating, cold holding, and hot holding food shall be sufficient in number and capacity to provide safe food temperatures. |
out |
Observed the Retail Reach In open air case to be 68*F. Equipment was checked with a TDA infrared thermal gun. |
|
Priority Foundation (PF) |
0 |
| 35,36 Pests & contamination |
in |
|
|
|
0 |
| 35,36 36 Contamination prevented during food preparation, storage or display |
in |
|
|
|
0 |
| 35,36 0080-04-09-.03(3)(e) Food shall be stored in a clean location, not exposed to contamination, at least 6 inches above the floor. Food shall not be stored in prohibited areas such as: locker/ch... |
out |
Observed cases of packaged food items stored on the floor of the Food Service Walk in freezer. Food shall be stored in a clean location, not exposed to contamination, at least 6 inches above the floor. Food shall not be stored in prohibited areas such as: locker/changing room, toilet room, garbage room, mechanical room, or under sources of contamination. |
|
Core (C) |
0 |
| 38,39 wiping cloth & washing produce |
in |
|
|
|
0 |
| 38,39 38 Wiping cloths properly used and stored |
in |
|
|
|
0 |
| 38,39 0080-04-09-.03(3)(d)4 Wiping cloths shall be maintained dry or held in sanitizer; free of debris; wiping cloth storage containers are stored off the floor |
out |
Observed wet, dirty, soiled wiping cloths stored on the 3-bay sink in the food service kitchen area. Wiping cloths shall be maintained dry or held in sanitizer; free of debris; wiping cloth storage containers are stored off the floor. |
|
Core (C) |
0 |
| 42,43 Single service & gloves |
in |
|
|
|
0 |
| 42,43 42 Single-service articles stored and used |
in |
|
|
|
0 |
| 42,43 0080-04-09-.04(9)(c)1 Single-service articles protected from contamination |
out |
Observed single service cups and Pizza boxes stored on the floor in the food service kitchen area. Single-service articles protected from contamination, at least 6 inches above the floor. |
|
Core (C) |
1 |
| 44,45 Utensils and equipment |
in |
|
|
|
0 |
| 44,45 44 Food and Non-food contact surfaces, cleanable, designed, constructed, and used |
in |
|
|
|
0 |
| 44,45 0080-04-09-.04(1)(a) Food contact equipment surfaces shall be safe, durable, corrosion-resistant, nonabsorbent, smooth, and easily cleanable |
out |
Observed clear food containers stored on ready rack in the food service kitchen area to have a build-up of sticker residue; no longer smooth and easily cleanable. Food contact equipment surfaces shall be safe, durable, corrosion-resistant, nonabsorbent, smooth, and easily cleanable. |
|
Priority (P) |
0 |