Inspection

Food Safety Retail Inspection

Inspection details


Inspection Date Inspection Type In Person/Virtual Establishment Type Risk Type Permit posted Previous inspection available
12/18/2023 High Risk Food Retail No No

Equipment Temperatures


Description Temperature
All storage coolers and walk in cooler 41*F or Below
All storage freezers and walk in freezer 2*F or below

Food Temperatures


Description Temperature State Of Food
Chicken patty 198
Hamburger patty 190
Chicken Nuggets 157
Fish Fillet 158
Sliced Tomatoes 42
Ice cream mix 37

Warewashing Information


Machine Name ppm Sanitizer Name Sanitizer Type Temperature
3 Bay Sink 200 Kay Sink Sanitizer Powder 72*F

Violations


Violation Status Observations Corrective Actions Violation Category Repeat
40,41 Utensils in 0
40,41 41 Utensils, equipment, and linens; stored, dried, and handled in 0
40,41 0080-04-09-.04(9)(a)1 Equipment and utensils are allowed to air-dry or used after adequate draining out Observed Food containers stored wet stacked in backroom at time of inspection. General Mgr. Brandy Harrelson voluntarily corrected during inspection. Core (C) 0
44,45 Utensils and equipment in 0
44,45 44 Food and Non-food contact surfaces, cleanable, designed, constructed, and used in 0
44,45 0080-04-09-.04(1)(a) Food contact equipment surfaces shall be safe, durable, corrosion-resistant, nonabsorbent, smooth, and easily cleanable out Observed the lid covering of the soft serve machine to have a corner broken off at time of inspection. Priority (P) 0
46 Non-food contact surfaces clean in 0
46 0080-04-09-.04(6)(a)1(iii) Non-food contact surfaces shall be kept free of an accumulation of dust, dirt, food residue, and other debris. out Observed numerous non food contact surfaces that had a build-up of food residue and debris. The areas are as follows: The exterior wall of the nozzle area and the outside of the ice chute of the Fountain Machine in the drive thru area, The storage shelves of the prep tables, The exterior walls of the coffee creamer machine, and the sides of the equipment in between the fryers at the time of inspection. Core (C) 0
47,48,49 Plumbing in 0
47,48,49 48 Plumbing installed; backflow devices in 0
47,48,49 0080-04-09-.05(2)(b)3 Air gap sufficient between water supply outlet and flood rim level out Observed Drain Hose stored down in the drain with no air gap at time of inspection. Manager cut the drain hose to give it the required air gap during the inspection. Priority (P) 0
Total Score Violation Score Inspection Score Inspection %
100 10 90 90
Violation Category Total Count Violation Count Inspection Count Inspection %
69 0 69 100
Core (C) 45 2 43 95
Priority (P) 49 2 47 95
Priority Foundation (PF) 39 0 39 100