| 08 Adequate handwashing sinks properly supplied and accessible |
in |
|
|
|
0 |
| 08 0080-04-09-.06(3)(a)3 Handwashing sinks, properly supplied with drying devices |
out |
Paper towels at the hand washing sink in the food preparation area were observed be inaccessible from the paper towel dispenser. |
|
Priority Foundation (PF) |
0 |
| 14 Food contact surfaces; clean and sanitized |
in |
|
|
|
0 |
| 14 0080-04-09-.04(6)(b)1 Food contact cleaning frequency; 4 hours at ambient temperature |
out |
Self-serve ice deflection machines at the soda station were observed to have excessive amount of black substance and black residues. |
|
Priority (P) |
1 |
| 19,20 safe temperature holding |
in |
|
|
|
0 |
| 19,20 19 Hot holding temperature |
in |
|
|
|
0 |
| 19,20 0080-04-09-.03(5)(a)6(i)(I) Hot holding at 135F or above for Time/temperature control for safety foods |
out |
Sausage biscuit at the grab and go self-serve was observed to have internal temperature of 129 degrees F. |
Person in charge voluntary discarded the foods referenced in the violation in the trash during the inspection. |
Priority (P) |
1 |
| 19,20 20 Cold holding temperature |
in |
|
|
|
0 |
| 19,20 0080-04-09-.03(5)(a)6(i)(II) Cold holding at 41F or less for Time/temperature control for safety foods |
out |
Sausage patties, scramble eggs, cheese, and sausage rolls being stored in plastic container in the small cold holding unit at the food preparation area were observed to have internal temperature between 46-52 degrees F. |
Person in charge voluntary discarded the foods referenced in the violation in the trash during the inspection. |
Priority (P) |
1 |
| 30,31 Food temp controls |
in |
|
|
|
0 |
| 30,31 30 Proper cooling methods, adequate equipment for temperature control |
in |
|
|
|
0 |
| 30,31 0080-04-09-.04(3)(a)1 Equipment for cooling, heating, cold holding, and hot holding food shall be sufficient in number and capacity to provide safe food temperatures. |
out |
Small cold holding unit the food preparation area were observed to have ambient temperature of 70.4 degrees F. |
|
Priority Foundation (PF) |
0 |
| 33 Thermometers provided and accurate |
in |
|
|
|
0 |
| 33 0080-04-09-.04(2)(d)9 Temperature Measuring Devices shall be located in hot and cold holding units; easily readable |
out |
No working thermometer was observed in the small cold holding unit at the food preparation area. |
|
Priority Foundation (PF) |
0 |
| 35,36 Pests & contamination |
in |
|
|
|
0 |
| 35,36 36 Contamination prevented during food preparation, storage or display |
in |
|
|
|
0 |
| 35,36 0080-04-09-.03(3)(b)1 Preventing packaged and unpackaged food contamination by separation, packaging, and segregation methods |
out |
Employee's personal foods were observed to be wrapped in a grocery bag and sitting inside the large ice machine. |
Person in charge voluntary removed employee's personal foods from the ice machine during the inspection. |
Priority (P) |
0 |
| 35,36 0080-04-09-.03(3)(c)2 Storage or display of packaged food in contact with water or ice |
out |
Excessive amount of ice build up was observed on package frozen foods such as package ice cream in the freezer. |
|
Core (C) |
0 |
| 46 Non-food contact surfaces clean |
in |
|
|
|
0 |
| 46 0080-04-09-.04(6)(a)1(iii) Non-food contact surfaces shall be kept free of an accumulation of dust, dirt, food residue, and other debris. |
out |
The small cold holding unit, small freezer and makeshift unit was observed to excessive amount of dried food residues and build up on the bottom. |
|
Core (C) |
0 |
| 53 Ventilation, lighting, and designated areas used |
in |
|
|
|
0 |
| 53 0080-04-09-.06(4)(c) Designated area for personal items shall be located so that food and equipment are protected from contamination; personal belongings properly stored |
out |
Employee's personal items (mouthwash) was observed to be stored on the ice machine above the ice bin. Employee's personal food was observed in the walk in cold holding unit over food service foods and raw produce. |
Person in charge removed these items referenced in the violation to designated areas during the inspection. |
Core (C) |
0 |